Complete Coverage in Five Easy Steps
The
Metal Roofing System is easy to install and won't disrupt your business
or work. Here's how this innovative system works:
Step 1: Surface preparation
Loose rust and scale are removed by wire brushing, scraping, or
sandblasting. All field-applied coatings must be removed. Galvanized
metal surfaces are acid etched to remove oil, dirt and debris and are
thoroughly rinsed with water, and allowed to dry completely. Rusty
areas are primed.
Step 2:
Caulking
All end laps, screw heads, washers and openings are sealed with Kwik
Kaulk, Conklin's acrylic caulking compound.
Step 3: Treating
the seams
The base coat and Spunflex fabric reinforcement or Conklin 3" butyl
tape are applied along all vertical panel joints. Spunflex II or
Conklin 6" butyl tape is used on horizontal seams.
Step 4: Seal
fabric reinforced joints
A second application of base coat over the fabric completes the seam
waterproofing.
Step 5: Energy
efficient finish coat
A final white reflective top coat is applied over the entire roof.
Conklin's Metal Roofing System will adhere to bare steel primed with
Metal Ready, Conklin's rust inhibiting metal primer, galvanized steel
and aluminum metal decks.
Tested. Proven. Trusted.
Conklin Roofing Systems have been tested, proven and trusted by
building owners nationwide for over 27 years. Our systems are tested
and approved by major code approval agencies, such as Factory Mutual
(FM) and Underwriters' Laboratories (UL).
Architects, specifiers, building owners and facility managers around
the coutry rely on Conklin Roofing Systems to protect the valuable
contents of their buildings.
Affordable Quality
Conklin Metal Roofing Systems are designed to provide long-term
peorformance at a fraction of the cost of metal replacement.
Additionally, there are financial benefits to metal roof restoration
systems.
Metal roof restoration can be expensed as a repair or maintenance cost
while roof replacement must be capitalized.
For more
information e-mail
us today or call (816) 405-2374.
